Enforcer "No Touch" RTE Plate with Adjustable Delay Timer, for Outdoor Use - Single Gang

Model: SD-9263-KSQ

Category: Touchless Access Control, Request to Exit

Brand: Seco-larm Usa Inc.

Dealer pricing

The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

Main Features

• Weather-resistant (IP65) for outdoor use
• Clean and simple no-touch operation reduces the risk of cross-contamination
• Adjustable sensor range up to 7" (18cm)
• Stainless steel plate, available in slimline or single-gang
• 1.2A relay, adjustable trigger duration 0.8~30 seconds
• Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated
• SD-9163-KSVQ and SD-9263-KSVQ only: Manual override button functions without electricity in case of power failure

Application/Usage School, Hospital, Office, Clean Room, Clinic, Factory, Hospital, Laboratory, Office, School, Clean Room, Clinic, Factory, Laboratory
Brand Name Enforcer
Category Type Request to Exit
Depth 2.8", 1.5"
Environmental Certification RoHS
Environmentally Friendly Yes
Features Time Delay, Weather Proof, Time Delay, Weather Proof
Gang Type Single Gang
Height 4.5"
Input Voltage 24 V DC, 12 V DC, 12 V DC, 24 V DC
Manufacturer SECO-LARM U.S.A., Inc
Model SD-9263-KSQ
Material Stainless Steel
Maximum Operating Temperature 131°F (55°C), 131°F (55°C)
Minimum Operating Temperature -4°F (-20°C), -4°F (-20°C)
Print/Message No Touch Exit
Product Type Push Button
Vendor Name Seco-larm Usa Inc.
Weight (Approximate) 3.81 oz
Width 2.8", 1.5"

Not found

recommended items