The HP600ULM is a 12VDC or 24VDC power supply with an HPMOM6 distribution controller to be used with Card Access Systems. It provides 12/24VDC through 6 power-limited outputs. The 6 outputs will switch ON or OFF security devices such as Magnetic Locks, Door Strikes, Magnetic Fire Door Holders, etc.

The HPMOM6 offers a choice of two (2) outputs, "Fail Safe or Fail Secure" and a choice of two (2) Fire inputs, N/O or N/C, and Reverse Polarity triggered by the FACP. The Controller also has 2 Trouble/ Alarm dry contact outputs type "Form C"; 1) Power Fail/ PTC Activated, and 2) FACP Triggered. The unit has not been evaluated as elevator equipment, and is not authorized for bell output in Mercantile applications.

Main Features

• Input voltage: 120VAC 60Hz; Current: 2.50A max.
• Output Voltage: 12VDC or 24VDC, jumper selectable; Current: 6.0A continuous output maximum plus battery charger (not supervised).
• Fail safe dry contact output on AC Failure (within one minute).
• Built-in charger for sealed lead acid or gel cell type batteries.
• Instantaneous transfer to stand-by battery on AC failure.
• Battery presence detection (within 1 minute).
• Battery low disconnect at 9.90VDC or 19.90VDC.
• High voltage disconnect at 15VDC or 30VDC.
• Yellow LED (L3) indication for battery disconnected and battery low.
• Fail safe dry contact output for Battery trouble (Fail Safe).
• Battery polarity reversal protection.
• Thermal overload and short circuit protection.
• DC output PTC activated indication by Red LED (L2).
• DC output failure indication by Red LED ( L4 ).
• AC presence indication by Green LED ( L1 ).
• DC output indication by Red LED ( L5 .)
• Battery Leads included.
• Power Board Dimensions: 6.2”L x 4.7”W x 2.5”H.
• Enclosure Dimension: 17”L x 13.5”W x 4.75”H. Accommodates two 12 Volt 12AH batteries. When using larger batteries, a UL approved enclosure must be used.