The LE4010 connects the alarm control panel to the Cellular network and reports alarm signals directly to a monitoring station receiver (SurGard System I-IP/II/III/IV/5). The LE4010 uses the Cellular network to ensure low-cost, high-speed and reliable alarm communications and is compatible with control panels that communicate using the Contact ID or SIA (300 baud) formats.

The LE4010 is installed between the telephone connection of a control panel and telephone line. When used in a backup role, the communicator assesses the connection to the PSTN phone line, and if that has failed, it then connects to the Cellular network to send an alarm signal to the monitoring station. In a primary role, the communicator simply sends the alarm transmission over the Cellular network immediately.

Main Features

• Uses LTE network for highspeed, reliable and low-cost communications to an IP receiver
• Automatically switches to 3G (HSPA/HSPA+) if LTE service is not available
• Compatible with control panels that communicate using the Contact ID or SIA (300 baud) formats
• Full event reporting
• 4 on-board inputs with NC, NO or SEOL supervision & 4 on-board outputs (open collector)
• Activation and initialization via webuser or mobile interface provided by C24 Communications
• PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts
• Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
• View communicator status directly from your mobile phone to support on-site or remote troubleshooting
• SMS command & control for panel arm/disarm
• Dimensions:8.8" x 5.4" x 2.2" (224 mm x 138 mm x 55 mm)